Standard Abrasives 3" x 2" x 1/4" Buff & Blend Combi Wheel MED 80 Grit

Standard Abrasives Part# 898015

Manufacturer: Standard Abrasives

Standard Abrasives Buff and Blend Combi-Wheel 898015 3" x 2" x 1/4" S MED 80

For added cut, the Standard Abrasives Buff and Blend Combi-Wheel features alternating flaps of Buff and Blend non-woven GP material and coated abrasive resin bonded material. The combination of flaps blends and removes contaminants more aggressively than a non-woven brush, while producing a uniform final finish with a linear scratch pattern.

For added cut, we designed Standard Abrasives Buff and Blend Combi-Wheel with alternating flaps of Buff and Blend non-woven GP material and coated abrasive resin bonded material. The combination of flaps blends and removes contaminants more aggressively than a non-woven brush, while producing a uniform final finish with a linear scratch pattern.

Versatile Utility and Linear Scratch Pattern The Standard Abrasives Buff and Blend Combi-Wheel is a versatile product that is a great follow-up to coated abrasive steps in operations where a linear scratch pattern is desired. Use it to remove heavy oxidation prior to painting or plating, finish stamped or extruded aluminum parts, add a grain finish to stainless steel sheets, or create a satin finish on other large surfaces. It is suitable for ferrous and non-ferrous metals.

Added Strength for Demanding Finishing Applications The durable construction of Combi-Wheel flaps provides aggressive, controlled action and a consistent, uniform finish. The Buff and Blend flaps are made from tough, resin-reinforced nylon fiber with aluminum oxide abrasive grain. The Combi-Wheel is more aggressive than a flap brush, which does not incorporate coated abrasive flaps, and less aggressive than a flap wheel, which is entirely constructed from coated abrasive flaps. In applications where a flap brush needs some extra teeth for blending or cleaning, the addition of coated abrasive flaps in a Combi-Wheel provides added abrasive strength.

To suit a variety of large and small finishing operations, we offer this popular product in a broad range of sizes and in two grades, medium (MED) and very fine (VFN).

Load-Resistant Construction Boosts Life and Performance Standard Abrasives Buff and Blend material is load-resistant to keep you cutting with fresh mineral. The gaps in the open web allow unwanted swarf to escape. Consequently, less debris clogs the abrasive, so the mineral can stay fresh, keep cutting sharp and deliver a consistent cut over the life of the product. As the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface, contributing to cleaner surfaces and less re-work. Furthermore, manual fatigue that may result from applying heavy pressure to a dull abrasive is reduced.